فالت های لوگ کیل:
Load "C:\\at91sam7s64_Atmel_example\\blink.AXF"
VTarget = 3.300V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.03r, compiled Mar 9 2009 18:04:21
Firmware: J-Link ARM V8 compiled Dec 1 2009 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints: 0
Found 1 JTAG device, Total IRLen = 4:
Id of device #0: 0x3F0F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: RTCK seems to be bridged with TCK
Info: Auto JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Core does not stop after Reset, setting WP to stop it.
***JLink Warning: PC of target system has unexpected value of 0x00200000 after reset.
JTAG speed: 8000 kHz
Info: Using DBGRQ to halt CPU
Info: Resetting TRST in order to halt CPU
***JLink Error: Unable to halt ARM core
***JLink Error: Can not read register 9 (R15 (PC)), CPU may not be halted
Erase Failed!
و این پیغام خطا هم روی صفحه میاد
Flash Timeout.Reset the target and try again.
Error:Flash download failed - ARM7TDMI
ولی من براحتی با خود برنامه J-Link میتونم چیپ رو ایریز و پروگرم کنم.
با تنظیماتی که تو خود J-Link برای Sam7s64 لود کردم
مشکل از کجاست کلافه شدم بخدا.
یاعلی